Healing is Voltage.
- Jerry Tennant, M.D.
If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.
In every culture and in every medical tradition before ours, healing was accomplished by moving energy.
Future medicine will be the medicine of frequencies.
- Albert Einstein
The Kloud offers the latest advancement in PEMF therapy.
The frequency range is expanded up to 20,000 Hertz.
This covers 20 times the stimulatory resonance frequencies for important physiological substances and metabolic reactions.
Simple to Use Without Bluetooth:
Switch the unit on with the power button, and the blue light comes on.
Once it warms up, the OK check mark light comes on.
Select the program (1-5) with the right/left arrow selection button.
Click the start button, and the selected program light will flash while the program runs.
The unit will beep at the end of the 15-minute session.
On/Off Switch (Mechanical Toggle): Circle = Off; Line = On; When you turn it on, the Power Light (at the right end of the second row of lights) lights up blue, the unit beeps, and the Check Light lights up green.
1st Row of Controls:
Start/Stop Button (icon is a triangle and a square): Press and release the Start/Stop Button to start or stop running a program. The program will stop automatically after 15 minutes. The green program light will stop blinking. Turn off the toggle switch when the program ends to save the battery.
Set the Intensity:
When a program light is flashing (indicating the program is running), press and hold the Start/Stop Button for about 2 seconds to see the intensity setting. While holding it, press the Right/Left Button to change the intensity setting. Successive presses will cycle the intensity between 1 and 5. We recommend using intensity 1 or 2, mostly. You can set the intensity separately for each of the five programs.
Select the Program:
Right/Left Button (icon is two triangles pointing left and right): When a program light is on constantly (selected but not running), press the Right/Left Button to change the program selection. It cycles between the five programs.
Check Battery Level:
Press and hold the Right/Left button for about 3 seconds to show the battery charge level. P1-5 = 100% charge, P1-4 = 75% charge, P1-3 = 50% charge, P1-2 = 25% charge, and P1 = 10% charge. If none of the program lights light up, the battery is empty. Charging takes about 4 hours.
P1 Light: Relax (Phase 4)
P2 Light: Balance (Phase 5)
P3 Light: Energize (Phase 1)
P4 Light: Synchronize (Phase 2)
P5 Light: Transform (Phase 3)
2nd Row of Controls:
Always Turn Off Bluetooth:
Bluetooth Button (icon resembles two chainrings): Blue light indicates Bluetooth is on. Turn it off by pressing and releasing the button. Bluetooth is not a therapeutic EMF signal. Bluetooth can upgrade the Kloud software when the company releases an update.
Low Battery Light: The light comes on when the Kloud needs a charge.
Battery Charge Light: To charge the Kloud, turn the toggle switch off and plug in the charging cable. The Blue Battery Charge light indicates the unit is charging. The LED light on the charging cable will also be blue. When the light on the cable turns green and all lights on the Kloud control panel are off, the unit is fully charged.
Check Light: Green light indicates the unit is warmed up and ready to use.
Power Light: Blue light indicates the power is on.
If you are a self-healer and are looking to integrate our theories, systems, methods, tools and remedies in your own life, please complete our online consulting application here...
If you are a practitioner and are interested in applying our theories, systems, methods, tools and remedies in your practice, please also complete our online practitioner application here...
The miHealth device can be used in contact mode on the body for Microcurrent, and it is emitting PEMF at the same time.
One of the great features of the miHealth is that it can also be used off the body in broadcast mode for PEMF therapy.
That means you can do a treatment without having to disrobe.
The device is similar in size to a cell phone, and many athletes call it their 'pocket doctor'.
The miHealth is a great, portable and flexible healing tool...
It is an investment at $3500, but you can access the rest of the NES system first and then see how it may fit into your Healing tool kit.
Start with a free energy analysis based on your vocal frequencies here...
You'll be amazed by the report.
Bob Dennis, Ph.D. was the original developer of PEMF technology for NASA.
When government funding for the healing technology dried up, he was so inspired by the results that he decided to fund it himself.
He still continues to update the technology today as more data comes in...
As he zeroes in on particular primary healing frequencies, he eliminates others, allowing for longer battery life and miniaturization...
An ICES M1 wearable unit costs $650 and can be worn for hours a day while continuing to be active.
This device treats one particular part of the body at a time, so if you have multiple problem areas, you will want to rotate the location you apply it to...
To optimize your process of Accelerated Self Healing™, we recommend laying on a BEMER mat for a total of 16 minutes a day...
Research at the Berlin Institute for Microcirculation shows that both blood and lymph flow increase by about 30%.
We lose circulation as we age, and a 30% increase is equivalent to 40 years of reverse aging...
NASA has studied the technology and plans to incorporate it in future space suits...
The company has implemented a lease purchase option making this a very affordable whole body wellness tool that, frankly, I would not want to be without...
Many people who use this device are referred to us to supply their botanical-nutritional support, and the combination of the two is producing remarkable results.
[*The statements herein have not been evaluated by the Food and Drug Administration. This is not intended to diagnose, treat, cure, or prevent any disease.] T.D.C.